Rubber chemical overview
◆ Functional fillers
◆ Processing aid
◆ Plasticizer
◆ Factice
◆ Tackiifier resin
◆ Anti-oxidant
◆ Wax
◆ Solid PU rubber
|
Functional fille |
Z91 |
General use |
Thermal process grade, high brightness, excellent extrusion properties |
|
Z86 |
General use |
General grade, widely application, can replace Carbon black |
|
|
V88 |
General use |
General grade, widely application, suitable the light color product |
|
|
N85 |
General use |
Yellowish with same physical properties, suitable the colorful product |
|
|
Q |
Silicone rubber |
Good extrusion properties with high collapse resistance and reduce stickiness |
|
|
VM56 |
Peroxide curing |
Low tensile, nice abrasion and compression set performance |
|
|
PF216 |
Sulfur curing |
Excellent tensile strength, abrasion and dynamic load capacity, Suitable in oil seal |
|
|
Processing aid |
DH-040 |
Homogenizer |
Improves Homogeneity of polymers. Improves compound tack. |
|
DH-060 |
Homogenizer |
Improves Homogenity of Polymers. Improves Compound Tack. Especially suitable for White Filler Compounds. |
|
|
DF-500 |
Peptize |
Reduces Viscosity of Polymers during Internal Mixing. Suitable for Tyre, Beltings & Mold Products. |
|
|
DF-600 |
Peptize |
It helps in reducing compound mixing temperature by approx. 10%. It also helps to reduce mixing time by faster filler incorporation viscosity. |
|
|
DF-820 |
Peptize |
Chemical peptize based on fatty derivatives. A Peptize for NR based compounds reduces mooney viscosity of the batch. |
|
|
DF-860 |
Peptize |
Highly content of chemical peptize based on fatty derivatives. A Peptize for NR based compounds reduces mooney viscosity. |
|
|
DL-016 |
Processing aid |
Promotes Uniform Flow during Processing Exhibits Excellent Surface Finish to the end product. Offers higher Extrusion rates and better Mould Filling. |
|
|
DL-042 |
Processing aid |
Lowers Viscosity and promotes Uniform Flow. Reduces Die-Swell of the Extrudates. Best to reduce mould fouling in EPDM. |
|
|
DL-212 |
Processing aid |
Improve the scorch safety, flow and release, Reduce the viscosity and mixing energy, and increase the disperse highly active white fillers and other ingredients. Suitable in NR, SBR, BR, EPDM, NBR, CR and EVA. |
|
|
DL-222 |
Processing aid |
Offers Internal lubrication for FKM, ACM, NBR- PVC, CSM, Halo IIR, ECO, Milable Urethane. Help eliminate Mill Sticking in CR. Reduces Inter-Molecular Friction. |
|
|
Plasticizer |
HC-100 |
Process oil |
Naphthenic process oil |
|
HC-1200 |
Process oil |
Naphthenic process oil |
|
|
EBSO |
Process oil |
Heat stability and weather resistance |
|
|
DOTP |
Process oil |
Non-phthalate and environmentally friendly plasticizer |
|
|
DOS |
Process oil |
Nice in cold weather performance |
|
|
DINP |
Process oil |
Lower volatility and migration in Rubber |
|
|
DOP |
Process oil |
Excellent plasticizing efficiency and average performance of plasticizer |
|
|
Factice |
B |
Amber |
Improves the process ability of extrusion process and gives very good surface finish Improves the process of extrusion and decreases T90 |
|
LIV |
White |
Improve ozone resistance and flowing |
|
|
Wax |
S683 |
Wax |
Microcrystalline Wax |
|
Tackifier resin |
C510 |
C5 |
Rubber, Paint, Ink, Adhesive |
|
C910 |
C9 |
Rubber, Paint, Ink, Adhesive |
|
|
CM95 |
Coumarone |
Rubber, Paint, Ink, Adhesive |
|
|
DCPD |
DCPD |
Improve the cutting, chunking /chipping resistance |
|
|
PU Rubber |
5004 |
PUR |
Solid polyurethane rubber, high abrasion |